EN 
FR 
Renault 5 Turbo flywheel original fitment 6001000196
390.00 €
In stock
Renault 5 Turbo flywheel
Compatibility:
- Fits the original Sachs MZ190 clutch assembly
- All Renault 5 Turbo versions: 8220 – 8221
Features:
- Material: treated steel for increased wear resistance
- Original reference: 6001000196
- Balanced and supplied with the starter ring gear
- Ready to fit to the car
Warning: Original Renault 5 Turbo flywheels are often micro-cracked. Reusing them can be dangerous, with a risk of bursting.
Price includes shipping costs.
Technical specifications
Renault 5 Turbo flywheel
Manufacturing:
This flywheel was designed by Mespiecesauto using the original Renault technical drawing, while strictly complying with the manufacturer’s specifications.
Features:
- Material: steel selected for its long-term durability and optimised friction coefficient
- Perfectly balanced, supplied with the starter ring gear, ready to fit
- Original reference: 6001000196
Safety:
Most original Renault 5 Turbo flywheels are warped or micro-cracked. Reusing them may present a risk of bursting. It is therefore preferable to choose a new flywheel in order to ensure engine reliability and durability.
Compatibility:
- Fits the original Sachs MZ190 clutch assembly
- All Renault 5 Turbo versions: 8220 – 8221
Other versions available:
- Flywheel for AP Racing clutch setup
- Flywheel for Sachs RCS200 clutch
Price: shipping included
When removing or replacing the flywheel, remember to replace the fixing bolts. They are not torque-to-yield bolts, but excessive torque can still stretch them. If you prefer to reuse them, measure each bolt's under-head length: any stretched bolt must be discarded.
Frequently asked questions
Do you sell the Renault 5 Turbo clutch?
Not yet. However, we hold the original archives relating to its production, and we are currently working on the reverse engineering of this very specific clutch: the twin-plate MZ 190. Contact us to be informed of its availability.
What is the tightening torque for the R5 Turbo flywheel bolts?
The flywheel bolt tightening torque is 5 daN·m ± 0.5 (i.e. 50 N·m ± 5). Before refitting, refer to the advice above: preferably new bolts, or check the under-head length if you reuse them.
